Hi there,Welcome to Club TST! 😊Those profiles were current and active at the time of the print guide first being published. Since that time, it appears the links have lapsed.In any case, the unavailability of those profiles isn’t of any great consequence. Both Jeff and I use and recommended the standard pre-loaded default profiles that come with Cura as we find they perform better than anything else we’ve tried. We use the ‘Standard’ .20 for most pieces, or the .16 or .12 for more intricate pieces. Once our second Kickstarter finishes, I intend on updating the print guide and will ensure I update the print profile section amongst other things.Happy printing,Jay
Hi there, Welcome to Club TST! 😊 Those profiles were current and active at the time of the print guide first being published. Since that time, it appears the links have lapsed. In any case, the unavailability of those profiles isn’t of any great consequence. Both Jeff and I use and recommended the standard pre-loaded default profiles that come with Cura as we find they perform better than anything else we’ve tried. We use the ‘Standard’ .20 for most pieces, or the .16 or .12 for more intricate pieces. Once our second Kickstarter finishes, I intend on updating the print guide and will ensure I update the print profile section amongst other things. Happy printing, Jay